Fasteners

Square/Phillips Flat Head With Nibs under Head Coarse Thread Type 17 Zinc Plated Screws.

Most popular style of Assembly screw in the industry. The Type 17 point reduces splitting and eliminates the need for a pilot hole. The nibs allow the screw to self-countersink. Combo drive can be driven with a Square or Combo. Can be removed with a Phillips. Better Quickscrew. Type 17 point reduces splitting. Used with Most Hardwoods.

Phillips Flat Head With Nibs Under Head Coarse Thread Type 17 Zinc Plated Screws.

The Original Quickscrew Design with Nibs and has a deep Coarse Thread for extra holding power and is heat treated for added strength. This screw is ideal for use in applications with pre-drilled pilot holes.

Better Quickscrew. Type 17 point reduces splitting. Used with Most Hardwoods.

Phillips Round Washer Head Self Drill #3 Point Zinc Plated Screws

Have Sheet Metal threads and an actual drill bit moulded into the tip of the screw. Drill point penetrates 12-16g Steel Gauge Metal studs. Known as Self Drilling or SDS Screws

Phillips Truss Head Self Tapping Type A SMS With Type 17 Zinc Plated Screws Better Install Screws. Used for Cabinet Install with Wood or light gauge metal studs. WI Approved

Phillips Round Washer Head High-Low Thread With Type 17 Groove in Shank Zinc Plated Screws Best QX2 Install Screws use in Metal Studs. WI Approved.

# 10-9 X 2 1/2″ Square/Phillips Round Washer Head Coarse Thread Double Type17 Zinc Plated

The Patented Quickcutter Thread allows the screw to be driven into the stud w/o a pilot hole

Phillips Round Washer Head High-Low Thread With Type 17 Groove in Shank Zinc Plated Screws

#14-12 X 3″ Phillips Round Washer Head High-Low Thread With Type 17 Groove in Shank Zinc Plated Screws

Screw has Hi-low threads and a self-piercing point.

Best QX2 Install Screws in Wood or Light Duty Metal Studs. WI Approved.

# 8-32 X 3/4″ Phillips/Slotted Truss Head Machine Screws Zinc Plated

Designed for pulls, knobs, handles, and other types of hardware attachments.

Screw Works in all Drawer pulls with 8-32 Internal Thread

Phillips Large Round Washer Head Coarse Thread Type 17 Zinc Plated Screws (1/2 Head O.D.)

Allows the installer to move the drawer front in case of improper alignment after installation.

Better Quick Screws. Type 17 point for Hardwood Drawer Front Adjuster Screws.

Phillips Bugle Head Drywall Screw Coarse Thread Black Phosphate/Wax Standard Garden Variety Drywall Screw works in very soft material.

# 6-9 X 1″ Phillips Head Drywall Screw Coarse Thread Black Phosphate/Wax Used to e driven through drywall into wood studs. Standard Garden Variety Drywall Screw works in very soft material.

Pozi Flat Head Euro Screws Type B SMS Thread Nickel Plated.

Primarily used in frameless style cabinets. The holes on the slide line up with a standard 32mm line boring pattern, for an easy installation of the slides. Good Quickscrews. Euro Screws used with Blum. Grass or similar Hinge Plates or drawer slides.

Phillips Flat Head Coarse Thread Zinc Plated Screws

Standard hardware screws for a variety of hinge, drawer slide, and general applications.

Good Quickscrews designed for Softer Woods or Particle Board.

Phillips Round Washer Head Coarse Thread Zinc Plated Screws

Low Profile round washer head for use with Ball Bearing Drawer Slides.

Phillips Pan Head Coarse Thread Type 17 Zinc Clear Screws

These Screws are used to install a variety of different components that do not require the head to countersink. Developed primarily to install compact hinges.

Better Quickscrews. Type 17 Point Coarse Thread Reduces splitting. Known as Edge Screws.

Phillips Pan Head, Fine Thread, Type 17 Point, Plain Steel Finish Screws

General Use Pockethole Screw with a pan head and type 17 auger trip.

Pocket Hole Screws. Fine Thread Type 17 for Hardwood Face Frames. Works with all Jigs

Square Modified Pan Head, Fine Thread, Type 17 Point, Plain Steel Finish Screws

These can be used in any manufacturers pocket holes. Fine thread are great for hardwoods such as Oak and Maple.

Pocket Hole Screws. Fine Thread Type 17 for Hardwood Face Frames. Works with all Jibs.

Square Drive, Modified Pan Head, Coarse Thread, Type 17 Point, Plain Steel Finish Screws

Coarse thread offers great holding power in any wood. These also work great in a wide range of composite materials like MDF and Particleboard.

Pocket Hole Screws. Coarse Thread 17 for Softwood Face Frames. Works with all Jigs.

Square Modified Pan Head, Hi-Low Thread, Type 17 Point, Plain Steel Finish Screws

Hi-Low Threads work best in applications with Red Oak and other Medium Hardwoods for greater holding power and less strip out. Also for Melamine.

Pocket Hole, Screws. Coarse Thread Type 17 for Softwood Face Frames. Works with all Jigs.

Square Round Washer Head Coarse Thread Type 17 Plain Steel Screws

Ideal for use with Kreg Pockethole jigs. The wider coverage of the round washer lead holds strong and results in a tight joint.

Pocket Hole Screws. Coarse Thread Type 17 for Softwood Face Frames. Works with Kreg Jigs.

Square Round Washer Head, Fine Thread, Type 17 Point, Plain Steel Finish Screws

Pocket Hole Screws. Fine Thread Type 17 for Softwood Face Frames. Works with Kreg Jigs.

Bits Used with Combo Drive Quickscrews. New packaging in plastic case.

Bits Use to drive phillips screws with # 6, 7, 8, 10

Bits used to drive Square # 6, 7, 8, 9, 10 Screws. New Packaging in plastic case.

Unicatch F45 18 Guage Galvanized Chisel Point Painted Brown Heads Brad Nails 5,000 PER BOX.

Fits most 18  Guage Brad nailers: For use in the following Grex Tools, Senco, Unicatch, BeA, Bostitch, Porter Cable and much more.

23 GA. Headless Unicatch Micro Pins Fits

Senco, Grex 10,000 Total

Unicatch Narrow Crown Staples. 18 Gauge, ¼” Narrow Crown, L-Series Staples. Interchangeable with: Hitachi, Senco, Porter-Cable, Duo-Fast & Haubold.

Unicatch Crown StaplesUsed for Upholstery Framing. 16 Gauge, 7/16” Crown Staples.